Skip to content

Airstream Argosy Padded Window Protector

Regular price $740.00

Shipping calculated at checkout

Protect your Airstream Argosy Travel Trailer's front panoramic windows with our custom-designed Airstream Argosy Padded Window Protector. Easy to install and designed to remain in place while in motion and at the campsite, these custom-made products help shield your Argosy Travel Trailer's panoramic front windows from flying road debris.

Exclusively available at Airstream Supply Company, our Airstream Argosy Padded Window Covers are compatible with all Airstream Argosy vintage travel trailers. 


Available in Two Style Options

Our Airstream Argosy Padded Window Covers are available in two configurations:

  • Select full coverage for a cover that spans the entire width of the panoramic window
  • Select side window only to leave the central window open

Pick From Eight Color Options

Color Options

Please note there is a small upcharge any color other than black. Additional production time is required for custom colors. 

 

Easy Installation

This padded snap-on window cover attaches to the window with high-quality adhesive snaps that are applied to the edges of the window. No drilling is required.

Easily installed in 30-45 minutes. Detailed instructions and all supplies come with the kit, so you can easily complete the installation yourself.

The cover is 1/4" thick and made from 2 layers of highest quality USA-made materials. All materials and fasteners are marine grade.

The kit comes with snaps already installed on the cover, and includes everything you need to install the adhesive snaps on your camper, including detailed instructions with pictures.

NOTE: Installation is best done at temperatures higher than 50 degrees Fahrenheit. If installing in temperatures below 50F, the adhesive snaps will need a handful of days in the sun without the cover on to develop full strength.

Product Features

What material is the cover made of and how thick is it?

The cover is made from 2 layers of the highest quality marine grade fabric available.  It is ¼” thick.  This is much thicker than your typical vehicle “bra.”  The outer layer is Top Notch fabric, which is highly UV resistant, highly water resistant, highly abrasion resistant, and easy to clean.  It carries an 8 year warranty.  The back layer of fabric, facing the camper, is Boat Blanket.  It is a tough, yet soft, fabric that feels like the soft side of Velcro and will not scratch the windows or damage the finish of the trailer in any way.  The Boat Blanket acts as a padded shock absorber for flying debris.

Is the fabric water proof and UV resistant?

Yes!  The fabric is highly water resistant, so it will not soak up water or get heavy in the rain.  It is also highly UV resistant.  The outward facing fabric carries an 8 year warranty against sun damage.

Is it thick enough to protect the windows from damage due to road debris?

Yes!  This is the whole purpose of the cover.  This cover is much thicker than your typical protective vehicle “bra,” and will adequately protect your windows.   The dual layer design has a cushioning shock absorption effect to protect the window from flying debris.

Can I get a color besides black?

The outer fabric also comes in dark gray, light gray, taupe, tan, red, burgundy, dark green, navy blue, and pacific blue.  Expect a longer turn-around time for your order (2-3 weeks) as these colors must be special ordered.  Contact customer service to request a different color or for a sample color swatch.

How should I clean the cover?

Use a hose with a nozzle attached, and a simple soap (like Dawn), and perhaps a scrub brush for stubborn stains.

How to Install Argosy Padded Window Covers

VERY IMPORTANT – READ THIS BEFORE INSTALLING!

In addition to reading these instructions below, you can view a video of the installation process available here.


Airstream Argosy Side Window No-Drill Snap Installation Instructions


Step 1. Prepare the cover by snapping the adhesive snaps onto the existing snaps on the back of the cover. Do no remove the paper backing yet.

Also install the provided adhesive velcro in the sides of each window. This velcro is only temporary and will be used to help hold the cover in place during the installation process.

Argosy Window Installation Instructions

Step 2. With a helper, place the cover onto the window using the previously applied adhesive velcro to hold it in place. Adjust the position of the cover up and down and side to side until the cover is smooth and sits evenly around the entire window.


With the cover in place, peek behind the cover to examine the snap locations to be sure the adhesive snaps will land on the window, not on the metal window frame outside the window.


Step 3. Pick one of the corner snaps to install first – it doesn’t matter which one. Follow steps 4 and 5, below, to install the first snap.


Step 4. VERY IMPORTANT. Clean the window surface thoroughly as described below before applying the snap. For the first snap, lift the template up to clean underneath.

It is EXTREMELY IMPORTANT to clean the window surface well before applying the adhesive snaps. The cleaning process below is to remove the OIL RESIDUE and dirt from the road, which can be hard to see and may not be obvious. If you do not follow the steps below fully, you may just be pushing road oil and dirt around rather than removing it. This can cause snap failure.

  1. Use a dry paper towel to wipe the area to remove any oil or grime that you can.
  2. Use Windex and a new paper towel to clean the area again. The Windex will help loosen additional oils and debris.
  3. IMPORTANT! Use the provided alcohol pad now to thoroughly clean the area again.
  4. Final step. Wipe the area you just cleaned again with a new dry paper towel to ensure all hidden oils are removed.

Step 5. Remove the adhesive backing and press the snap firmly in place. DO NOT remove the snap from the cover to install it. Keep the snap on the cover, remove the backing, and press on it firmly against the window from the outside of the cover.

IMPORTANT: The adhesive on the snaps is pressure sensitive. After applying, you need to press firmly all around the snap – around all the edges and in the center– for a good 10-15 seconds. Sufficient pressure is necessary to obtain good adhesion.

Step 6. Repeat steps 4 and 5 for the remaining 3 corner snaps, and then for the other remaining snaps. Re-examine where each snap will land as you go and make adjustments as needed.

Step 7. When done with snap installation, carefully remove the cover from the window. After removing the cover, press firmly for several seconds on each snap again, to make sure they are firmly adhered to the window. Remove the temporary adhesive velcro from the window. If any adhesive residue from the
velcro remains, remove it with rubbing alchol, or, if needed, Goo Gone or a similar adhesive remover, which can be purchased at any hardware store.

Step 8. The following is recommended in all temperatures, but for sure in temperatures 50 degrees F and below: Allow the snaps to sit in the sunlight without the cover on for a handful of days to help provide warmth to promote full adhesion.

 

 

Airstream Argosy Full Window No-Drill Snap Installation Instructions


Step 1. Prepare the cover by snapping the adhesive snaps onto the existing snaps on the back of the cover, except for in the top center. Top center is indicated by the CoolCustomCanvas.com label. Do no remove the paper backing yet.

Also install the provided adhesive velcro in the outside corners of the trailer window. This velcro is only temporary and will be used to help hold the cover in place during the installation process.

Argosy Full Window Instructions

Step 2. Locate center on the top and bottom of the window. Install tape at the center on the metal frame just outside the window, and mark a line on the tape to indicate the exact center positions, top and bottom.

Step 3. Determine the position of the top center snap using the provided cardboard template. Hold the template at the upper edge of the window, and align the center line of the template with the center line you made on the tape. Secure the template in this position using additional tape. Run the tape vertically up to the metal window frame, so that you can still lift up the template to clean the window
underneath.

Step 4. VERY IMPORTANT. Clean the window surface thoroughly as described below before applying the snap. For the first snap, lift the template up to clean underneath.

It is EXTREMELY IMPORTANT to clean the window surface well before applying the adhesive snaps. The cleaning process below is to remove the OIL RESIDUE and dirt from the road, which can be hard to see and may not be obvious. If you do not follow the steps below fully, you may just be pushing road oil and dirt around rather than removing it. This can cause snap failure.

  1. Use a dry paper towel to wipe the area to remove any oil or grime that you can.
  2. Use Windex and a new paper towel to clean the area again. The Windex will help loosen additional oils and debris.
  3. IMPORTANT! Use the provided alcohol pad now to thoroughly clean the area again.
  4. Final step. Wipe the area you just cleaned again with a new dry paper towel to ensure all hidden oils are removed.

Step 5. Apply the top center snap. With the template in place, remove the paper backing on the adhesive snap, and place it in the center hole of the template.

IMPORTANT: The adhesive on the snaps is pressure sensitive. After applying, you need to press firmly all around the snap – around all the edges and in the center– for a good 10-15 seconds. Sufficient pressure is necessary to obtain good adhesion.

Step 6. With a helper, place the cover onto the window using the previously applied adhesive velcro to hold it in place. The single top snap is not strong enough to support the entire cover, so you will need to use the velcro at this stage. Adjust the position of the cover up and down and side to side until you can
snap the top center snap in place and until the cover is smooth and sits evenly around the entire window.

With the cover in place, peek behind the cover to examine the remaining snap locations to be sure the adhesive snaps will land on the window, not on the metal window frame outside the window.

Step 7. Now install the bottom center snap by repeating steps 4 and 5. DO NOT remove the snap from the cover to install it. Keep the snap on the cover, remove the backing, and press on it firmly against the window from the outside of the cover.

Step 8. Continue working outward from center, installing snaps one at a time, alternating top and bottom. Repeat steps 4 and 5 for each snap.

Step 9. When done with snap installation, carefully remove the cover from the window. After removing the cover, press firmly for several seconds on each snap again, to make sure they are firmly adhered to the window. Remove the temporary adhesive velcro from the window. If any adhesive residue from the
velcro remains, remove it with rubbing alcohol, or, if needed, Goo Gone or a similar adhesive remover, which can be purchased at any hardware store.

Step 10. The following is recommended in all temperatures, but for sure in temperatures 50 degrees F and below: Allow the snaps to sit in the sunlight without the cover on for a handful of days to help provide warmth to promote full adhesion.

 For a printable page of instructions, please see here

Shipping FAQ

Your window cover is made to order. Please allow 2 weeks from order placement for delivery. Any custom color (except for black) will require additional production time as this fabric needs to be special ordered.

For more information on our shipping times and rates, please view here.

Return Policy

We're happy to process a return for a full refund for any unused and unworn items still in their original packaging within 60 days of the shipment date. Unfortunately, we cannot process requests for refunds or exchanges after this time period.

For a detailed overview of our return policy, please view here.

Back to top

Shopping Cart

Your cart is currently empty

Shop now